Online Guides

Client Config File (wfinit.cfg)

wfinit.cfg is the plain text file saved in the root folder of mobile device storage containing the settings listed in the table below.

Setting nameValueComments
LoginNameUser name

Example:
LoginName=user1

PasswordUser password
(case sensitive)

Example:
Password=pwd1

ServerServer address

Example:
Server=192.168.10.10:10001

ForceLoginCredentialsTrue or FalseIf ForceLoginCredentials is False or missing, login credentials specified in wfinit.cfg are applied only if no other credentials were previously used on the device.
If ForceLoginCredentials is True, only login credentials specified in wfinit.cfg are used to login.

Example:
ForceLoginCredentials=True

AutoLoginTrue or FalseSet to True to login automatically

Example:
AutoLogin=True

AutoStartTrue or FalseSet to True to launch WalkieFleet client on device boot.

Example:
AutoStart=True

ShowOnBootTrue or FalseSet to True to keep WalkieFleet client in foreground after device boot. ShowOnBoot only makes sense when AutoStart=True.

Example:
ShowOnBoot=True

CH1, CH2, … CH100Group or user name
(case sensitive)
Makes sense for devices having knob selector to switch channels. Assign group name or user name to call by default when it is selected by knob.

Example:
CH1=GROUP1
CH2=GROUP2
CH3=dispatcher1
CH3=user1

MaxChannelsNumericNumber of channels assigned on the knob selector (by means of CH1 .. CH100 entries). MaxChannels makes sense for infinite knob selector.

Example:
MaxChannels=4

DefaultGroupGroup name
(case sensitive)
Group to call by default

Example:
DefaultGroup=GROUP1

SetDefaultSelectedTrue or FalseSet to True to set DefaultGroup as selected group.
Note! Group chosen as default by knob selector will be set as Selected when SetDefaultSelected=True

Example:
SetDefaultSelected=True

KeepMicOpenTrue or FalseSet to True to keep microphone always open. Reduce call initiation time, but restricts using microphone by other applications.
LowBatteryLevelNumeric (Percent)Starts low battery warning when battery level goes under this value.

Example:
LowBatteryLevel=20

LowBatteryWarningTextText message to pronounce when battery goes lower than LowBatteryLevel.

Example:
LowBatteryWarning=Time to charge the battery

DisableTTSTrue or FalseSet to True to disable all voice announcements.

Example:
DisableTTS=True

TTSLangLanguage code
(ISO 639-1)
Force this language to use in text-to-speech service.

Example:
TTSLang=en

PingServerTrue or FalseSet to True to send ping from client to server every 1.5 seconds. Keeps IP channel “warm” and considerably reduces call initiation delay after long idle time.
Note! PingServer=True noticeably increases battery consumption. Recommended for use on devices having big capacity battery.

Example:
PingServer=True

RemoteMonitoringTrue or FalseSet to True to allow remote monitoring of the device on dispatch console.

Example:
RemoteMonitoring=True

NotificationVolumeNumeric
(Percent)
Set percentage of the maximum sound level to adjust tone’s loudness.

Example:
NotificationVolume=50

FlipRearCameraTrue or FalseSet to True to flip rear camera for video calls.

Example:
FlipRearCamera=True

Download wfinit.cfg file example.

Professional Use

Walkie Labs LLC © 2018, All Rights Reserved.